HxMap 5.0 supports processing of datasets collected with the following sensor systems and FlightPro versions.
-
In case your dataset was collected with a FlightPro version not listed here, first ingest the data with HxMap 4.8.2, then continue processing with HxMap 5.0
FlightPro versions by system type
The table below lists the sensor systems, together with recommended and supported FlightPro versions, which can be ingested with HxMap 5.0.
|
Sensor System |
FlightPro Recommended |
FlightPro Supported |
|---|---|---|
|
CoastalMapper |
6.5.0 |
6.5.0 |
|
TerrainMapper-3 |
6.4.1 |
6.4.0, 6.3.1 |
|
CountryMapper |
6.4.1 |
6.1.0, 6.1.1, 6.1.2 6.2.1, 6.2.2, 6.2.3, 6.2.4, 6.2.5 6.3.1 |
|
DMC-4 |
6.4.1 |
6.1.0, 6.1.1, 6.1.2 6.2.1, 6.2.2, 6.2.3, 6.2.4, 6.2.5 6.3.1 |
|
ContentMapper |
6.4.1 |
6.0.0, 6.0.2 6.1.0, 6.1.1, 6.1.2 6.2.1, 6.2.2, 6.2.3, 6.2.4, 6.2.5 6.3.1 |
|
RCD30 in Chiroptera5 / Hawkeye5 |
5.5.5 |
5.5.5 |
|
TerrainMapper-2 |
6.2.6 |
6.0.0, 6.0.2, 6.0.3 6.1.0, 6.1.1, 6.1.2, 6.2.1 6.2.2, 6.2.3, 6.2.4, 6.2.5 |
|
CityMapper-2 |
6.2.6 |
6.0.0, 6.0.2, 6.0.3 6.1.0, 6.1.1, 6.1.2 6.2.1, 6.2.2, 6.2.3, 6.2.4, 6.2.5 |
|
DMCIII |
6.0.4 |
5.5.0, 5.5.1 6.0.0, 6.0.2 |
|
SPL100 / SPL100HA |
4.55 |
4.55 |
Limited Support Systems
The table below lists sensor systems which are in limited support. Data from these systems can be loaded in HxMap 5.0 but are no longer tested with latest features. Support may be fully removed in a later version.
|
Sensor System |
FlightPro Recommended |
FlightPro Supported |
|---|---|---|
|
CityMapper with CC3x 1 |
5.5.2 |
5.4.10, 5.5.0, 5.5.1 |
|
CityMapper with CC4x 1 |
6.0.5 |
5.4.10, 5.5.0, 5.5.1, 6.0.0, 6.0.2, 6.0.4 |
|
TerrainMapper with CC3x 2 |
5.5.2 |
5.4.10, 5.5.0, 5.5.1 |
|
TerrainMapper with CC4x 2 |
6.0.5 |
5.4.10, 5.5.0, 5.5.1, 6.0.0, 6.0.2, 6.0.4 |
1 CityMapper with Hyperion2 or Hyperion2+
2 TerrainMapper with RCD30 CH82