Icon reference list

Enter data handling module - file operations, data upload and download.

Enter flight execution module.

Enter configuration module. (When selected from main menu.)

Enter configuration dialog to current view. (When selected within flight execution.)

Exit Flight.

Quit Leica FlightPro and shutdown system.

Return to previous menu. Quit or cancel. Appropriate message box appears.

Change buttons on toolbar - display buttons related to current view.

Enter module to manage text for logfile entries.

Generate a logfile entry. Highlighted text is stored with a time tag in the logfile.

Enter height setting dialog.

Enter manual configuration dialog.

Enter service level.

Start system recovery.

Activate first help level to display short help text in status line.

Enter second help level to browse the system documentation.

Return from help, first or second level.

Jump to table of content in the system documentation.

Enter sensor release/sensor stop level

Start image data recording

Release a single frame image

Stop image data recording.

Open the shutter of the Hyperion LiDAR Unit

Close the shutter of the Hyperion LiDAR Unit

Set integration time control to automatic mode.

Store current terrain reflectance. Use stored value to adjust integration time.

Start marking a section on a line. For example data are useless due to clouds.

Stop marking a section on a line. The poor quality data condition on the line does not
exist anymore.

Change buttons on toolbar - display buttons to select view.

Show North-up navigation view.

Show Nose-up navigation view.

Show In-line navigation view.

Show 3D-navigation view.

Show Project view.

Show Project data alphanumerically.

Show Project data graphically.

Show real-time view.
Toggle Real-time view between full screen image view and image view with controls.

Show System status view.

Show Sensor status view.

Show IMU system status view.

Show GNSS status view.

Show Mass Memory status view.

Show Gyro Stabilized Mount status view.

Show histogram view.

Show log data.

Scroll up fast in list.

Scroll up in list.

Scroll down in list.

Scroll down fast in list.

Select previous input field in view.

Select next input field in view.

Mass Memories for joint operation.

Mass Memories for backup operation.

Increase value in input field in large steps.

Increase value in input field in steps.

Decrease value in input field in steps.

Decrease value in input field in large steps.

Restore default values.

Accept message, changes etc.

Cancel changes - restore previous settings.

Accept changes and save.

Accept changes and save as new data set.

Select data at cursor position.

Select all data listed.

Deselect data at cursor position.

Deselect all selected data.

Enter dialog to edit selected data set.

Enter dialog to create new data set.

Display project listing for project/flight plan selection.

Change buttons on toolbar - display buttons to select flight lines.

Select to fly previous line.

Select to fly next line.

List lines for selection of the line to be flown next.

Shorten or extend the line at line start or line end point.

Reverse direction of approach to next line.

If flying along a line: Abort line execution.
If not flying along a line: End project execution.

Search for closest line.

New computation of optimum flight path to next line.

Execute only part of line.

Execute whole line.

Change buttons on toolbar - display buttons to adjust image.

Decrease displayed brightness of image.

Increase displayed brightness of image.

Decrease displayed contrast of image.

Increase displayed contrast of image.

Display previous configuration set.

Display next configuration set.

Show next sensor status sub-view.

Show next sub-view, wrap from last sub-view to first sub-view.

Select section below or pan graphics.

Select section above or pan graphics.

Jump to previous item, section, etc. or pan graphics.

Jump to next item, section, continue in process, etc. or pan graphics.

Jump to previous warning / error logfile entry when browsing the logged data.

Jump to next warning / error logfile entry when browsing the logged data.

Enter language selection dialog.

Enter dialog displaying more details.

Enter dialog to arrange the order of the background maps for Operator and for Pilot.

Move the highlighted item up in the list.

Move the highlighted item down in the list.

Set focus to next column (wraps around from most right to most left column).

Zoom out.

Change buttons on toolbar - display buttons to shift / zoom graphical information.

Zoom in.

Change to next zoom step, wrap from maximum zoom to minimum zoom.

Scale adjustment to display the whole project in this view.

Pan center of viewing area to aircraft.

Show flight lines completed in one execution.

Hide flight lines completed in one execution.

Show flight lines completed in more than one execution.

Hide flight lines completed in more than one execution.

Show flight lines flown with warnings.

Hide flight lines flown with warnings.

Show flight lines flown with error condition.

Hide flight lines flown with error condition.

Show flight lines not yet flown.

Hide flight lines not yet flown.

Show non-planned manually released flight lines.

Hide non-planned manually released flight lines.

Show flight planning.

Hide flight planning.

Show flight path.

Hide flight path.

Change buttons on toolbar - display buttons to set filter to hide information.

Remove all filters - show all information.

Set filter: show logged user actions.

Set filter: show logged Control Unit status data.

Set filter: show logged sensor status data.

Set filter: show logged Mass Memory status data.

Set filter: show logged GNSS/IMU status data.

Set filter: show logged GNSS status data.

Set filter: show logged warnings and errors.

Seek in the log database the entry closest to the defined date and time.

Seek in the log database the latest log data entry.

Upload selected data to system.

Download selected to external memory device.

Download system log data to external memory device.

Enter dialog to upload new firmware, software releases and modules.

Download log data to external memory device.

Upload special configuration.

Show Extended Gyro-stabilized Mount status view.

Upload files to sensor head.

Upload or check license.

Enter data delete level.

Enter dialog to delete data on Mass Memory.

Enter dialog to delete data on external memory device.

Enter dialog to delete data on internal memory of system.

Delete selected data.

Delete highlighted configuration set.

Delete highlighted annotation text line from the text list.

Enter dialog to select flights to delete it from the flight plan database.

Enter dialog to select projects to delete it from the flight plan database.

Enter dialog to select maps to delete it from the internal memory.

Show Gyro-stabilized Mount status view.

Start self-test.

Set operational mode of Gyro-stabilized Mount to AUTO.

Start Adaptive Loop Calibration.

Show logged warnings and errors.

Show logged mount performance data.

Show log data.

Download mount log data to external memory device.

Move mount to desired position.

Store current attitude angle as maximum range.