Auto-detect logic

HxMap Data Copy tool uses special logic to detect raw data for supported sensors and will add all related partitions to the list of available data directories.

Here's the steps of auto detecting in the given order:

1. Firstly detecting SPL100 raw data which contains 6 disks/directories: two LiDAR raw data with .raw.tof files and four RCD30 raw data, each of them contains the same session or sessions

   • if found, all six disks/directories will be added automatically in the order of: SPL_LiDAR1, SPL_LiDAR2, RCD30_Master, RCD30_Slave1, RCD30_Slave2, RCD30_Slave3

2. If failed, then trying to detect HRQLS raw data which contains one or multiple disks/directories, each of them contains ONLY .raw.tof and .raw.tof.sha1 files

   • if found, the SPL LiDAR raw disks/directories from the same level will be added

3. If still failed, then trying to detect raw data for other supported sensors (e.g. RCD30, ADS80, ADS100, CityMapper, DMC and SPL) using the same logic as ingest

   • if found, all related MM paths will be added and the master MM will be listed on the top

4. If that still failed, pop up warning dialog "No recognized raw data directory found, do you still want to add the directory?" to allow user decide to add that single disk/directory or just quit

   • if user selects Yes, the selected disk/directory will be added

   • if user selects No, nothing will be added